Fuji Spray 6852G MP-V8-N Gravity Feed Spray Gun w Nylon Cup
Fuji Spray 6852G MP-V8-N Gravity Feed Spray Gun w Nylon Cup
Fuji MP-V8 gravity feed spray gun kit (6852G-MP-V8-N):
Optimized for spraying perfectly smooth automotive clear coats
Mid-pressure - Operates best at 12.2 cfm at 35 psi.
Non-corrosive stainless steel fluid passages
360-degree swivel air inlet to prevent tangling, reduce drag
Side-mounted fan pattern control knob
1.3 mm air cap installed (6800MP-V8 series)
600 cc (20-oz) nylon gravity cup #6840 (requires no gaskets)
Can also be used with 3M PPS 2.0 disposable spray cup system (requires S15 adapter)
Fuji 12-month warranty
Pay in 4 interest-free payments of $119.75 — (At checkout, choose PayPal as your payment method, then choose Pay in 4.)
Available separately:
Additional air caps in 6800 series: 1.2, 1.4, 1.7, 2.0, 2.2 mm)
1/4-in. Digital Air Flow Gauge with Locking Adjustment Valve #6873
#S15 adapter for using 3M PPS 2.0 standard cups and liners
Fuji 12-month Warranty
VOC-Compliant - Transfer rate efficiency higher than 85 percent
UPS Shipping is free to lower-48 states; Priority Mail rates apply for the rest of the U.S.A. For shipping rates elsewhere, check out with “SKIP SHIPPING TILL PAYPAL INVOICE.”
Fuji MP-V8 Spray Gun Specifications:
Recommended 12.2 cfm at 35 psi
Operating Range - 9 - 35 psi
Air Inlet Size - 1/4" BSP and NPS
Air Consumption - 12.2 CFM
Gun Weight - 18.38 oz
Application Type - Waterborne and solvent borne high-solid clear coat
Max Fan Width - 315mm (12.4 inches)
You may also find of interest:
The digital Fuji 6873 ¼-in. Air Flow Gauge with Locking Adjustment Valve.
Fuji 6800 Air Cap Setups.
Fuji 9030-10 Stainless steel strainers
For spraying base coats, the Fuji H-V8 spray gun (which uses only 6890 air caps)