Fuji Spray 6852G-MP-V8 Gravity Feed Spray Gun PPS-2.0-Ready no cup
Fuji Spray 6852G-MP-V8 Gravity Feed Spray Gun PPS-2.0-Ready no cup
FREE SHIPPING. Mid-pressure Fuji MP-V8 spray gun (6852G-MP-V8) “PPS 2.0 Ready” kit - for the ease and speed of using the 3M PPS 2.0 disposable paint cup system (widely available elsewhere). (Requires S15 adapter.) Note that this does NOT include any spray cup at all.
Optimized for spraying perfectly smooth automotive clear coats
Mid-pressure - Operates best at 12.2 cfm at 35 psi.
Non-corrosive stainless steel fluid passages
360-degree swivel air inlet to prevent tangling, reduce drag
Side-mounted fan pattern control knob
1.3 mm air cap installed
Fuji 12-month warranty
Pay in 4 interest-free payments of $112.25 — (At checkout, choose PayPal as your payment method, then choose Pay in 4.)
Available separately:
600 cc (20 oz) nylon gravity cup #6840
Additional air caps in 6800 series: 1.2, 1.4, 1.7, 2.0, 2.2 mm)
1/4-in. Digital Air Flow Gauge with Locking Adjustment Valve #6873
#S15 adapter for using 3M PPS 2.0 standard cups and liners
Fuji 12-month Warranty
VOC-Compliant - Transfer rate efficiency higher than 85 percent
UPS Shipping is free to lower-48 states; Priority Mail rates apply for the rest of the U.S.A. For shipping rates elsewhere, check out with “SKIP SHIPPING TILL PAYPAL INVOICE.”
Fuji MP-V8 Spray Gun Specifications:
Recommended 12.2 cfm at 35 psi
Operating Range - 9 - 35 psi
Air Inlet Size - 1/4" BSP and NPS
Air Consumption - 12.2 CFM
Gun Weight - 18.38 oz
Application Type - Waterborne and solvent borne high-solid clear coat
Max Fan Width - 315mm (12.4 inches)
You may also find of interest:
The digital Fuji 6873 ¼-in. Air Flow Gauge with Locking Adjustment Valve.
Fuji 6800 Air Cap Setups.
Fuji 9030-10 Stainless steel strainers.
For spraying base coats, the Fuji H-V8 spray gun (which uses only 6890 air caps)