Fuji Spray 6863G-H-V8 Gravity Feed Spray Gun no cup 3M PPS-Ready
Fuji Spray 6863G-H-V8 Gravity Feed Spray Gun no cup 3M PPS-Ready
FREE SHIPPING. Fuji H-V8 gravity feed spray gun PPS-2.0 Ready Kit (6863G-H-V8) - for the ease and speed of using the 3M PPS 2.0 disposable paint cup system (widely available elsewhere). (Requires S15 adapter.)
Optimized for spraying smooth, flawless automotive base coats
“High pressure low volume” (HVLP) - Operates best at 14.7 cfm at 28 psi
Non-corrosive stainless steel fluid passages
360-degree swivel air inlet to prevent tangling, reduce drag
Side-mounted fan pattern control knob
1.4 mm air cap installed
Fuji 12-month warranty
Pay in 4 interest-free payments of $112.25 — (At checkout, choose PayPal as your payment method, then choose Pay in 4.)
Available separately:
600 cc (20 oz) nylon gravity cup #6840
Additional air caps in 6890H series: 1.2, 1.4, 1.7, 2.0, 2.2 mm)
1/4-in. Digital Air Flow Gauge with Locking Adjustment Valve #6873
#S15 adapter for using 3M PPS 2.0 standard cups and liners
Fuji 12-month Warranty
VOC-Compliant - Transfer rate efficiency higher than 85 percent.
UPS Shipping is free to lower-48 states; Priority Mail rates apply for the rest of the U.S.A. For shipping rates elsewhere, check out with “SKIP SHIPPING TILL PAYPAL INVOICE.”
Fuji H-V8 Specifications:
Recommended 14.7 cfm at 28 psi
Operating Range - 9 - 28 psi
Air Inlet Size - 1/4" BSP and NPS
Air Consumption - 14.7 CFM
Gun Weight - 18.38 oz
Application Type - Waterborne and solvent borne high-solid clear coat
Max Fan Width - 325mm (12.8 inches)
Kit Includes:
H-V8 spray gun w/ 1.4 mm spray tip installed
Fuji 6380 Pressure Regulator Gauge
You may also be interested in:
The digital Fuji 6873 ¼-in. Air Flow Gauge with Locking Adjustment Valve.
Fuji 6890 Air Cap Setups.
Fuji 9030-10 Stainless steel strainers.
For spraying clear coats, the Fuji MP-V8 spray gun (which uses only series 6800 air caps)